Products
LILYGO® TTGO T8 ESP32-S2 V1.1 With ST77789 1.14 Inch LCD Display WIFI Wireless Module Type-c Connector TF Card Slot Development BoardProduct DescriptionHardware SpecificationsChipsetESPRESSIF-ESP32-S2FLASH 4MB PSRAM   8MBSRAM 320 kB SRAMButtonPower Switch,Rest,Boot,Customize,SMD DPI SwitchExternal DeviceTF CardUSB to TTLCH340CModular interface SD card、UART、SPI、I2C、PWM、I2S、ADCOn-board clock32.768KHz crystal oscillator Working voltage2.7V-3.6VWorking temperature range -40℃ ~ +85℃Weight9gSize65.48*26.02*5mm Power Supply SpecificationsPower Supply InputUSB 5V/1ACharging current500mABattery Input 3.7-4.2VJST Connector2Pin 1.25mmUSBType-C USBWi-FiStandardFCC/CE-RED/IC/TELEC/KCC/SRRC/NCC(esp32 chip)Protocol802.11 b/g/n(802.11n,speed...
TTGO TQ ESP32 0.91 OLED WIFI&bluetooth IoT Prototype Board for Arduino DetailsProduct Use Demonstration  Shipping List(Shipping list not include battery)TTGO TQ ESP32 0.91 OLED WIFI&bluetooth Module*1USB to TTL converter UART module CH340C *11X13 pin *21X7 row female *11X7 bent pin *11X2 Pin*1Program download:https://github.com/LilyGO/TTGO-TQ-0.91
TTGO TS v1.0 esp32 1.44 TFT MicroSD card slot speakers Bluetooth wifi moduleProduct Details Shipping List(Notice: The Shipping not include the battery)1 X TTGO TS v1.0 esp32 1.44 TFT MicroSD card module(include speaker and 1.44 TFT display)1 X Power Cable1 X Free Box
LILYGO® TTGO T-Display ESP32 WiFi And Bluetooth Module Development Board 1.14 Inch LCD Control BoardProduct  DescriptionHardware SpecificationsChipsetESPRESSIF-ESP32 240MHz Xtensa® single-/dual-core 32-bit LX6 microprocessorFLASHQSPI flash 4MB /16MBSRAM 520 kB SRAMButtonResetUSB to TTLCP2104Modular interfaceUART、SPI、SDIO、I2C、LED PWM、TV PWM、I2S、IRGPIO、ADC、capacitor touch sensor、DACLNA  pre-amplifierDisplayIPS ST7789V 1.14 InchWorking voltage2.7V-4.2VWorking currentAbout 67MASleep currentAbout 350uAWorking temperature range-40℃ ~ +85℃Size&Weight51.52*25.04*8.54mm(7.81g)Power Supply SpecificationsPower SupplyUSB 5V/1ACharging current500mABattery3.7V lithium batteryJST Connector2Pin 1.25mmUSBType-CWi-FiStandardFCC/CE-RED/IC/TELEC/KCC/SRRC/NCC(es...
1pc White Color 0.96 Inch Oled Display Module 128*64 Oled Lcd Display I2C 0.96 Iic Serial 128x641.Size:  0.96 inch2.High resolution: 128 * 643.Color:  white4.Viewing angle:   160 °5.Driver IC:  SSD13066.Working temperature:  -30  celcius ~ 80  celcius7.Module volume (generous):  27.0MM * 27.0MM * 4.1MM8.Supports many control chip:  Fully compatible with Arduino, 51 series, MSP430 series,  STM32/2, CSR chip, etc.  (a lot of routines for reference)9.Wide voltage support: without any modification, directly supports 3.3V ~ 5V DC10.Ultra-low power consumption: Normal operation Is 0.04W11.IO port occupies minimal display: The IIC communication, as long as the two IO ports  Exam...
LILYGO® TTGO T-Gallery ESP32 WiFi Module Bluetooth 2.4 Inch LCD Display Development BoardTTGO has been committed to the design, development and sales of development boards, suffering from the embarrassment of having no enclosure for the products. Many customers ask why they don't add enclosure to the product, so we began to think about how to add a suitable enclosure to our development board, which is beautiful and playable. We were inspired when we chose the packaging carton for the product. The TTGO-carton is based on the combination of the development board and the carton, allowing users to create exclusive music albums and smart speakers through ESP32 dual-core Bluetooth and WIFI function. While playing music on Bluetooth, we can grab picture album display from the websit...
0.96 Inch OLED Electronic Module ScreenProduct description1. Resolution: 128*64 dot matrix panel 2. Power supply:    a) VDD=1.65V to 3.3V        For C logic    b) VCC=7V to 15V        For panel drive 3. Dot matrix display   a) OLED drive output voltage, up to 15V   b) Segment maximum current: 100uA   c) Common maximum reverse current: 15mA       D256 level contrast brightness current control 4. Embedded 128*64 bit SRAM display cache 5. Pin selection MCU interface   a) 8-bit 68008000 serial port   b) Line SPl interface   c) I2C interface 6. The horizontal and vertical screens save the continuous scrolling function. 7.RAM wr...
TTGO TS V1.0 V1.4 ESP32 1.44 1.8 TFT MicroSD Card Slot Speakers MPU9250  Bluetooth Wifi Module   Product DetailsHardware Specifications  ChipsetESPRESSIF-ESP32-PCIO-D4 240MHz Xtensa® single-/dual-core 32-bit LX6 microprocessorFLASHQSPI flash/SRAM, up to 4 x 16 MBSRAM 520 kB SRAMKEYreset,IO34,IO35,IO39dispaly1.44 /1.8 inch ST7735 LCD TFT displayPower indicator lampredUSB to TTLCP2104modular  interfaceSD card、UART、SPI、SDIO、I2C、LED PWM、TV PWM、I2S、IRGPIO、capacitor touch sensor、ADC、DACLNA  pre-amplifierworking voltage2.3V-3.6Vworking currentabout 60mAsleep current1mAworking temperature range-40℃ ~ +85℃size1.44 : 50.72mm*32.73mm*11.67mm/1.8 : Power Supply SpecificationsPower SupplyUSB 5V/1Acharging current500mAbattery3.7V lithium batteryWi-F...
LILYGO TTV continues the concept of programmable products. Based on the transparent OLED design, we made a programmable desktop transparent small TV. Factory firmware routines are built-in, UI interface functions controlled by remote control, including desktop clock, airplane games, chess, animation play, and host sleep. Through this routine, you can modify the function application you want.TTV hardware functions include a matching infrared remote control. The main control module TTGO T-MICRO32 WIFI/Bluetooth, RTC, infrared receiving sensor, touch button, built-in battery, at the same time reserved I2C/UART interface, adapted to T-WATCH sensor expansion, and T-FH sensor expansion.Main control chip: ESP32 WIFI/BluetoothOLED: 1.54 inch blue transparent OLEDRTC: PCF8563Touch bu...
ChipESP32-WAROVERLCD3.5 inch capacitive touch screen ST7796 FT6X36USB TO TTLCP2104RelayHFD3 5V 2ARelay connector5.08DC-DC input5-12VDC Block Specifications5.5X2.1TYPE-C input5VUSB output5V 1ABattery interfaceH2.0 3.7V lithium batteryBattery switchToggle SwitchesButtonRST button, custom buttonRTCPCF8563Extension pin2.54 2X20Double-layer USB expansion portOutput 5V 1ADouble-layer USB interfaceThey are I2C/UART functionsGithub Link:https://github.com/Xinyuan-LilyGO/TTGO_TWatch_Library/tree/master/examples/LilyPiLILY Pi is designed and modified by the LILYGO team based on the Raspberry Pi appearance structure. The appearance is similar to the Raspberry Pi motherboard structure. The 2X20 expansion port next to it has reserved pins that match the Raspberry Pi GPIO, which is suitable for some Ras...
23页次2/2HomePrev12Nextlast
Copyright © 2020 深圳市芯元电子科技有限公司 版权所有