LILYGO® TTGO ESP32-Paxcounter LoRa32 V2.1 1.6 Version 433/868/915MHZ LoRa ESP-32 OLED 0.96 Inch SD Card Bluetooth WIFI Module Product DescriptionWorking voltage: 1.8~3.7vAcceptable current：10~14mATransmit current: 120mA@+20dBm 90mA@+17dBm 29mA@+13dBmOperating frequency: 868M/915MHzTransmit power: +20dBmReceive sensitivity :-139dBm@LoRa &62.5Khz&SF=12&146bps -136dBm@LoRa &125Khz&SF=12&293bps -118dBm@LoRa &125Khz&SF=6&9380bps ...
LILYGO® TTGO LORA V1.3 868Mhz ESP32 Chip SX1276 Module 0.96 Inch OLED Screen WIFI And Bluetooth Development Board Hardware SpecificationsChipsetESPRESSIF-ESP32 (Wi-Fi & Bluetooth)240MHz Xtensa® single-/dual-core 32-bit LX6 microprocessorModuleSX1276FLASHQSPI flash 4MBSRAM 520 kB SRAMButtonBOOT,RESTUSB to TTLCP2104Modular interfaceUART,SPI,SDIO,I2C,PWM,I2S,ADC,DAC,Cap SensorOn-board clock40MHz crystal oscillator Working voltage About 2.7V-3.6VSleep current About 600uAWorking temperature range -40℃ ~ +85℃ScreenOLED 0.96 InchSizeWeightAbout 53.07mm*25.32mm*7.5mmWeight6.5g Power SupplyPower Supply InputUSB 5V/1ACharging current500mABattery Input 3.7-4.2VCharge ICJST Connector2Pin 1.25mmUSB Wi-FiStandardFCC/CE-RED/...
IPEX 8dBi Antenna for Mini32 V2.0 for ESP8266 Mini D1/ESP32-Wrover DescriptionThis antenna is a dual-frequency antenna. I use it on my WiFi deauther OLED application. I find ESP8266 Mini D1+antenna works much better than ESP-12E/F. So I decide to use ESP-07+this antenna for all my projects. Product specificationsFrequency:2400~2500MHz, 4900~5900MHzS.W.R.:Antenna Gain: 8dbiRadiation: Omnidirectional antennaPolarization: LinearImpedance:50RPCB size: 95mm13.5mm0.55mmWire distance: 15cmConnector: IPEX Use Example Shipping List 1x IPEX 8dBi Antenna
GO ESP32 Micro USB Magnetic Connector For ESP8266 Product Details Package list TTGO ESP32 Micro USB Magnetic connector X 1
DIY Box Shell Suitable For PS4-WiFi Temperature And Humidity SensorDescription:DIY box can protect PS4-WiFi temperature and humidity sensor in all directions. Product Detail: Shipping List:DIY Box*1
TTGO XI 8F328P-U For Arduino Nano V3.0 Promini Or Replace DetailsTTGO XI is a development board. Comes with USB chip, you can directly connect to the computer burning program. You can use Arduino.cc's IDE to develop (you need your own installation support). The development environment is recommended, and the LGT support package can be installed directly in the development board manager.The MCU used by WEMOS X2 is LGT8F328P, a Atmel MEGA328P compatible chip. Integrated USB, more convenient to use.The link of operation steps:https://github.com/LilyGO/Arduino_XIALPHA 8F328P-UALPHA 8F328P-U is a Arduino compatible development board. You can use Arduino IDE to develop (you need your own installation support). The development environment is recommended, and the LGT ...
TTGO LoRa32 V2.1_1.6 version 433/868/915Mhz ESP32 LoRa OLED 0.96 Inch SD Card Bluetooth WIFI wireless Module ESP-32 SMA Product DescriptionWorking voltage: 1.8~3.7vAcceptable current：10~14mATransmit current: 120mA@+20dBm 90mA@+17dBm 29mA@+13dBmOperating frequency: 868M/915MHzTransmit power: +20dBmReceive sensitivity :-139dBm@LoRa &62.5Khz&SF=12&146bps -136dBm@LoRa &125Khz&SF=12&293bps -118dBm@LoRa &125Khz&SF=6&9380bps ...
BME280 Moudle Temperature Humidity Air Pressure, Trinity Environmental Sensor Product Description Working voltage: 3.3~5VWorking current: 2mAWorking temperature: -40 ° C ~ +85 ° CTemperature detection range: -40 ° C ~ +85 ° C, resolution 0.1 ° C, error ± 0.5 ° CHumidity detection range: 0~100%RH, resolution 0.1%RH, error ±2%RHPressure detection range: 300~1100hPaHumidity measurement response time: 1sModule size: 22 * 25 mmMounting hole size: inner diameter 3.1mm / outer diameter 6mmWeight: 12g Product DetailIt Can be used with T-Camera Shipping List1 X BME280 Moudle1 x Data line
TTGO LORA SX1278 ESP32 0.96 OLED 32Mbit 433Mhz For ArduinoDescription:The 433MHz antenna must be used in conjunction with the IPEX interface (if the antenna is not connected, The signal will weaken)Lithium battery charging and discharging circuit, when the battery is full, the LED will stop working. When using, pay attention to '+' and '-' of the battery, otherwise it will be damaged！Using the IO port touch screen touch signal input, you need to add the 100nF pull-down capacitor at this pin!Product Properties：This product is a 4Mt bytes (32 Mt bit) chip based on ESP32 WIFI increased OLED, namely LoRa remote modem, 433MHz frequency, high sensitivity is about -148dBm, +20dBm output power, high reliability, long transmission distance.The 4Mt bytes (32 Mt bit)&...
LILYGO® TTGO T-Block ESP32 Main Chip WiFi And Bluetooth Compatible Multifunction ModuleHardware ChipsetESPRESSIF-ESP32 (Wi-Fi & Bluetooth)240MHz Xtensa® single-/dual-core 32-bit LX6 microprocessorFLASH16MB / PSRAM 8MBSRAM 520 kB SRAMButtonSwitch, ResetUSB to TTLCP2104Modular interfaceI2C On-board clock40MHz crystal oscillator Working voltage2.7V-3.6VWorking temperature range -40℃ ~ +85℃Size46.47*43*30.44 mmWeight27.40g Power SupplyPower Supply InputUSB 5V/1ACharging current500mABattery Input 3.7-4.2VBattery3.7V lithium batteryJST Connector2Pin 1.25mmUSB Wi-FiStandardFCC/CE-RED/IC/TELEC/KCC/SRRC/NCC(esp32 chip)Protocol802.11 b/g/n(802.11n，speed up to150Mbps)A-MPDU and A-MSDU polymerization，support 0.4μS Protection intervalFreq...
Black PVC Case And Soft Rubber Sleeve For TTGO T-Camera ESP32WROVER & PSRAM Camera Module DescriptionBlack PVC Case:TAKACHI brand CS75N-B model CNC forming and PVC panelSoft Rubber Sleeve:TAKACHI brand CSSC75-OP-B model Black PVC CaseIt blocks dust and protects the camera module. The back of the case is also equipped with a small rope hole for easy carrying.At the same time, a microphone wiring port is reserved on the protective case. Soft Rubber SleeveThe black soft rubber sleeve provides a comfortable touch and provides better friction, which is not easy to slip from the hand, making it easy for buyers to use. Product DetailBlack PVC Case And Soft Rubber Sleeve For TTGO T-CameraNotice:If you buy a PVC case, it does not include a soft rubber sle...
LILYGO®TTGO T-Higrow ESP32 WiFi And Bluetooth Battery And DHT11 Soil Temperature And Humidity Photometric Electrolyte Sensor Hardware SpecificationsChipsetESPRESSIF-ESP32 (Wi-Fi & Bluetooth)240MHz Xtensa® single-/dual-core 32-bit LX6 microprocessorFLASHQSPI flash 4MB SRAM 520 kB SRAMButtonIO0Wake up IO35ResetUSB to TTLCP2104Modular interfaceUART、SPI、SDIO、I2C、LED PWM、TV PWM、I2S、IRGPIO、capacitor touch sensor、ADC、DACLNA pre-amplifierOn-board clock40MHz crystal oscillator Temperature and humidity sensorDHT11Reserved extension interface21~22Working currentAbout 150 mASleep currentAbout 220 uAWorking temperature range -40℃ ~ +85℃Size&Weight155.04*35*8.19mm(13.65g)Power Supply SpecificationsPower Supply InputUSB 5V/1ACharging c...