LILYGO® TTGO T5 V2.3.1_2.13 Inch E-Paper Screen New Driver ChipBased on the original version, the new version removes all LED, further reducing power consumption.OverviewDueto the advantages like ultra low power consumption, wide viewing angle,clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.Features· No backlight, keeps displaying last content for a long time even when power down· Ultra low power consumption, basically power is only required for refreshing· Comes with development resources and manual (examples for Arduino-esp32)SpecificationsOperating voltage: 3.3VInterface: 3-wire SPI, 4-wire SPIDisplay col...
Features:TheLILYGO Mini E-paper core is based on the ESP32 main control chip +1.02 inch e-paper programmable, developable, and expandable product concept. The design focuses on low power consumption and the basic requirements of MINI appearance. In order to keep the product appearance as much as possible The mini is based on the 1.02 inch e-paper screen size, and theshell is designed based on this mimi structure to keep the entire module mini.MIni E-paper Core:1.3D printed shell2.ESP32-PICO-D4 4MB Flash WIFI/Bluetooth3. Low power consumption sleep mode is about 10uA4.1.02 inch e-paper@128X805. Three-way toggle button6.TF card socket7. Reset button8. Battery charging and discharging circuit (note: no battery)9. Bottom expansion interface (2.54 female row)10. Adapt to T-U2T downloader (if yo...
Note for use:For more use of driver parameters, please visit our github instructions:github.com/Xinyuan-LilyGO/LilyGo-EPD47Whenusing, it needs to correspond to the pin sequence of the touch screen, do not reverse the connection, otherwise the touch screen may be damaged. The touch screen is equipped with adhesive paper that is attached to the e-paper. The adhesive film must be torn off when using it, and the display area on the corresponding e-paper is correctly pasted. Avoid tearing the adhesive tape repeatedly or it may damage the touch screen. Avoid pulling the touch screen cable when using it.Specifications:-ESP32-WROVER-E (ESP32-D0WDQ6 V3)-TYPE-C -PH 2.0 Holder-16MB FLASH -PSRAM 8MB-6pin FPC touch screen expansion connector-USB to TTL CP2104-Battery charge and discharge...
LILYGO® TTGO T5 T5S V2.4 Wifi Bluetooth Wireless Module Base ESP-32 Esp32 Yellow Display EPaper Electric Development BoardProduct Description OverviewThis is an E-paper display module, resolution with embedded controller, communicating via SPI interface, supports more color display.Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on. Features· No backlight, keeps displaying last content for a long time even when power down· Ultra low power consumption, basically power is only required for refreshing· Comes with development resources and manual (examples for Arduin-esp32)...
LILYGO® TTGO T5 V2.4 Wifi And Bluetooth Basis ESP-32 Esp32 1.54/2.13/2.9 EPaper SPEAKEROverviewThis is an E-paper display module, 1.54inch, 200x200 resolution, with embedded controller, communicating via SPI interface, supports black, and white color display.Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on. Features· No backlight, keeps displaying last content for a long time even when power down· Ultra low power consumption, basically power is only required for refreshing· Comes with development resources and manual (examples for Arduin-esp32) Specifications· Operating voltage: 3.3V...
LILYGO® TTGO T5S V2.4 Wifi Bluetooth Wireless Module Base ESP-32 Esp32 Yellow Display EPaper Sperker Electric Development Board OverviewThis is an E-paper display module, 1.54inch, 200x200 resolution, with embedded controller, communicating via SPI interface, supports yellow, black, and white three-color display.Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on. Features· No backlight, keeps displaying last content for a long time even when power down· Ultra low power consumption, basically power is only required for refreshing· Comes with development resources and manual (exampl...
LILYGO® TTGO T5 V2.2 ESP32 2.9' EPaper Plus Module E-Ink Speakers Product Description2.9″ ePaper module 296*128 pixels,MCU: ESP32 can interface with other systems to provide Wi-Fi and Bluetooth functionality through its SPI / SDIO or I2C / UART interfaces.Speakers： 8Ω1W 15X10X3.6mmTF CARD3D ANTENNAGROVE(I2C)Lithium battery interface, 500mA Max charging currentBattery Connector: PH-1.25mmAll of the IO pins run at 3.3V.MCU: ESP32-D0WDQ06 ESP32 can interface with other systems to provide Wi-Fi and Bluetooth functionality through its SPI / SDIO or I2C / UART interfaces.Clock Speed(Max) ： 240MhzFlash ： 4M bytes More information https://github.com/LilyGO/TTGO-Electronic-Badgehttps://github.com/Xinyuan-LilyGO/LilyGo-T5-ink-series Pin R...
LILYGO® E-Paper Display Module 1.54/2.13/2.7/2.9 Inch E-Ink Display Module Yellow/Black/White For Raspberry Pi for ESP32 T5 T5S OverviewThis is an E-paper display module, resolution with embedded controller, communicating via SPI interface, supports more color display.Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.Features· No backlight, keeps displaying last content for a long time even when power down· Ultra low power consumption, basically power is only required for refreshing· Comes with development resources and manual (examples for Arduin-esp32) Specifications·...
LILYGO® TTGO T5s V2.8 ESP32 2.7' EPaper Plus Module For Alexa I2S DAC MAX98357A MEMS Microphone ICS43434Product DescriptionLastest ESP32 Version: REV12.7″ePaper board consisting of ESP32-D0WDQ6, I2S DAC MAX98357A, and one pcs I2S MEMS microphone ICS43434Single channel, Class-D amplifier embedded DAC, MAX98357 is connected to ESP32 through I2S bus.MEMS microphone Invensense ICS-43434 is connected to ESP32 through I2S bus.On-board USB-UART interface (CP2102) with several glue logic for direct binary uploading.WIFIBluetooth4 MB Flash3D ANTENNA500mA Battery ManagementLED indicator: There are 4 LEDs show the battery status in real time.Power button: Click one time will start. Fast click 2 times will shut down.2.7″ ePaper module 264*176 pixels, TFCARDProtection: Sho...
LILYGO® TTGO T5S V2.4 Wifi Bluetooth Wireless Module Base ESP32 Red Display EPaper Speaker Electric Development BoardOverviewThis is an E-paper display module, 1.54inch, 200x200 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.Features· No backlight, keeps displaying last content for a long time even when power down· Ultra low power consumption, basically power is only required for refreshing· Comes with development resources and manual (examples for Arduin-esp32)Specifications·...
LILYGO 3.71 inch capacitive touch ink screen can be used as an independent module to connect to different main control or development boards through the reserved 2.54 row female interface.It can also be used as a Raspberry Pi, LILY PI directly expands the module, and the corresponding pinout interface is designed to adapt to the Raspberry Pi and LILY PI.The board also reserves the Btb interface that can expand the T-BLOCK (when using the T-BLOCK expansion, the T-BLOCK motherboard needs to be taken out of the shell).Products that can be used together:https://www.aliexpress.com/item/1005001447548347.html3.71 Ink screen extended function board parameters:-3.71 Ink screen parametersProduct model GDEW0371W7Type Graphic dot matrixResolution 416*240(DPI:130)Dimensions (mm) 92.99*53*1.18Field of v...