Products
产品名称:

LILYGO® TTGO T-Beam V1.1 ESP32 433/868/915/923Mhz WiFi Bluetooth ESP32 GPS NEO-6M SMA 18650 Battery Holder With OLED

上市日期: 2020-06-24
建议销售价: 0

LILYGO® TTGO Meshtastic T-Beam V1.1 ESP32 433/868/915/923Mhz WiFi Bluetooth ESP32 GPS NEO-6M SMA 18650 Battery Holder With OLED

LILYGO® TTGO Meshtastic T-Beam V1.1 ESP32 433/868/915/923Mhz WiFi Bluetooth ESP32 GPS NEO-6M SMA 18650 Battery Holder With OLED

 

Product DemonstrationNote:OLED is not soldered to T-BEAM)

Product Features

ESP32
Lastest ESP32 Version: REV1
WIFI
Bluetooth 
8MB PSRAM
4MB Flash
3D Antenna
LORA

 

Product Description
Working voltage: 1.8~3.7v
Acceptable current:10~14mA
Transmit current: 120mA@+20dBm
                               90mA@+17dBm
                               29mA@+13dBm
Operating frequency: 433/470MHz(433HMz version) /868M/915M(868MHz version)
Transmit power: +20dBm
Receive sensitivity :-139dBm@LoRa &62.5Khz&SF=12&146bps
-136dBm@LoRa &125Khz&SF=12&293bps
-118dBm@LoRa &125Khz&SF=6&9380bps
-123dBm@FSK&5Khz&1.2Kbps
Frequency error:+/-15KHz
FIFO space :64Byte
Data rate :1.2K~300Kbps@FSK
                   0.018K~37.5Kbps@LoRa        
Modulation Mode :FSK,GFSK,MSK,GMSK,LoRa TM,OOK
Interface form :SPI
Sleep current :0.2uA@SLEEP
                           1.5uA@IDLE
Operating temperature :-40℃- +85℃
Digital RSSI function
Automatic frequency correction
Automatic gain control 
Low voltage detection 
Fast wake-up and frequency hopping
Highly configurable data packet handler

 

GPS
GPS modules NEO-6M, 3V-5V power supply Universal
Destined module with ceramic antenna, signal super
Save the configuration parameter data EEPROM Down
With data backup battery
There are LED signal indicator
Default Baud Rate: 9600

 

Power

Power Supply Input USB 5V/1A

Charging current 500mA
Battery Input  3.7-4.2V
Charge IC AXP192

  

OLED Description:
1.Size:  0.96 inch
2.High resolution: 128 * 64
3.Color:  white
4.Viewing angle:  > 160 °
5.Driver IC:  SSD1306
6.Working temperature -30  celcius ~ 80  celcius
7.Module volume (generous):  27.0MM * 27.0MM * 4.1MM
8.Supports many control chip Fully compatible with Arduino, 51 series, MSP430 series,STM32/2, CSR chip, etc.  (a lot of routines for reference)
9.Wide voltage supportwithout any modification, directly supports 3.3V ~ 5V DC
10.Ultra-low power consumption: Normal operation Is 0.04W
11.IO port occupies minimal display: The IIC communication,as long as the two IO ports

LILYGO® TTGO Meshtastic T-Beam V1.1 ESP32 433/868/915/923Mhz WiFi Bluetooth ESP32 GPS NEO-6M SMA 18650 Battery Holder With OLED

LILYGO® TTGO Meshtastic T-Beam V1.1 ESP32 433/868/915/923Mhz WiFi Bluetooth ESP32 GPS NEO-6M SMA 18650 Battery Holder With OLED

 

More information:

https://github.com/geeksville/Meshtastic-Android/blob/master/README.md

https://github.com/meshtastic/Meshtastic-device/releases\

https://github.com/Xinyuan-LilyGO/LilyGO-T-Beam

Pin Schematic

 

LILYGO® TTGO Meshtastic T-Beam V1.1 ESP32 433/868/915/923Mhz WiFi Bluetooth ESP32 GPS NEO-6M SMA 18650 Battery Holder With OLED

 

Size picture

 

 

LILYGO® TTGO Meshtastic T-Beam V1.1 ESP32 433/868/915/923Mhz WiFi Bluetooth ESP32 GPS NEO-6M SMA 18650 Battery Holder With OLED

 

Shipping List

433MHz/868MHz Version

1 X TTGO T-Beam 
1 X 433MHz/868MHz Antenna      
1 X 0.96 inch 128X64  OLED
2 X Pin 
Note: OLED is not soldered to T-BEAM

LILYGO® TTGO Meshtastic T-Beam V1.1 ESP32 433/868/915/923Mhz WiFi Bluetooth ESP32 GPS NEO-6M SMA 18650 Battery Holder With OLED

915MHz/923MHz Version
1 X TTGO T-Beam 
1 X 915MHz/923MHz Antenna
1 X 0.96 inch 128X64 OLED
2 X Pin  
Note:OLED is not soldered to T-BEAM

 

LILYGO® TTGO Meshtastic T-Beam V1.1 ESP32 433/868/915/923Mhz WiFi Bluetooth ESP32 GPS NEO-6M SMA 18650 Battery Holder With OLED

  

LILYGO® TTGO Meshtastic T-Beam V1.1 ESP32 433/868/915/923Mhz WiFi Bluetooth ESP32 GPS NEO-6M SMA 18650 Battery Holder With OLED

 



Hot Products / Hot products More
2021 - 07 - 31
LILYGO® TTGO T5 V2.3.1_2.13 Inch E-Paper Screen New Driver ChipBased on the original version, the new version removes all LED, further reducing power consumption.OverviewDueto the advantages like ultra low power consumption, wide viewing angle,clear display without electricity, it is an ideal choice for applications such as...
2021 - 07 - 31
Features:TheLILYGO Mini E-paper core is based on the ESP32 main control chip +1.02 inch e-paper programmable, developable, and expandable product concept. The design focuses on low power consumption and the basic requirements of MINI appearance. In order to keep the product appearance as much as possible The mini is based on the 1.02 inch e-paper screen size, and theshell is designed based on this...
2021 - 07 - 19
LILYGO®& pauls_3d_things T-micro32 Open-Smartwatch is designed by pauls_3d_things,around the micro size of LILYGO T-micro32 module based on ESP32, with circular LCD,power battery charge and discharge management circuit, USB to TTL program upload circuit, software and hardware All open source.Parameters:1.LILYGO T-micro32 module2.4MB FLASH3.USB to TTL CH340E4.1.3 inch 240x240 resolution ci...
2021 - 07 - 19
Pin Diagram LILYGO T-WATCH-2020 is based on a design concept that can be programmed, can be worn, can be networked, and can be interactive. Integrated ESP32 with WIFI/Bluetooth,easy to program and develop, and more convenient to connect to the Internet. 2D IPS 1.54 inch watch capacitive touch screen using OCA process, zinc alloy metal process frame, making the device structure more robust and...
Copyright © 2020 深圳市芯元电子科技有限公司 版权所有