Shenzhen Xin Yuan Electronic Technology Co., Ltd.
 
手机官网
 
关注我们微信公众号
购物车图片 购物车 ( )
找服务 找新闻
热门搜索:
全部商品分类
服务热线: 0755-83380665
Products
产品名称:

1PCS Mega 2560 R3 Mega2560 REV3 ATmega2560-16AU Board ON USB Cable compatible for arduino good quality low price + USB

上市日期: 2017-12-19
建议销售价: 0

1PCS Mega 2560 R3 Mega2560 REV3 ATmega2560-16AU Board ON USB Cable compatible for arduino good quality low price + USB

   The Mega 2560 is a microcontroller board based on the CH340. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Duemilanove or Diecimila.

   The Mega 2560 is an update to the Mega, which it replaces.

   The Mega2560 differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the CH340 programmed as a USB-to-serial converter.

   Revision 2 of the Mega2560 board has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU mode.

   Revision 3 of the board has the following new features:

   1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible both with the board that use the AVR, which operate with 5V and with the Due that operate with 3.3V. The second one is a not connected pin, that is reserved for future purposes.

   Stronger RESET circuit.

   Atmega 16U2 replace the 8U

1PCS Mega 2560 R3 Mega2560 REV3 ATmega2560-16AU Board ON USB Cable compatible for arduino good quality low price + USB

  • Microcontroller CH340

  • Operating Voltage 5V

  • Input Voltage (recommended) 7-12V

  • Input Voltage (limits) 6-20V

  • Digital I/O Pins 54 (of which 15 provide PWM output)

  • Analog Input Pins 16

  • DC Current per I/O Pin 40 mA

  • DC Current for 3.3V Pin 50 mA

  • Flash Memory 256 KB of which 8 KB used by bootloader

  • SRAM 8 KB

  • EEPROM 4 KB

  • Clock Speed 1 6 MHz

1PCS Mega 2560 R3 Mega2560 REV3 ATmega2560-16AU Board ON USB Cable compatible for arduino good quality low price + USB

   1x2560+USB cable

1PCS Mega 2560 R3 Mega2560 REV3 ATmega2560-16AU Board ON USB Cable compatible for arduino good quality low price + USB1PCS Mega 2560 R3 Mega2560 REV3 ATmega2560-16AU Board ON USB Cable compatible for arduino good quality low price + USB1PCS Mega 2560 R3 Mega2560 REV3 ATmega2560-16AU Board ON USB Cable compatible for arduino good quality low price + USB

1PCS Mega 2560 R3 Mega2560 REV3 ATmega2560-16AU Board ON USB Cable compatible for arduino good quality low price + USB

   The Mega 2560 is a microcontroller board based on the CH340. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Duemilanove or Diecimila.

   The Mega 2560 is an update to the Mega, which it replaces.

   The Mega2560 differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the CH340 programmed as a USB-to-serial converter.

   Revision 2 of the Mega2560 board has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU mode.

   Revision 3 of the board has the following new features:

   1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible both with the board that use the AVR, which operate with 5V and with the Due that operate with 3.3V. The second one is a not connected pin, that is reserved for future purposes.

   Stronger RESET circuit.

   Atmega 16U2 replace the 8U

1PCS Mega 2560 R3 Mega2560 REV3 ATmega2560-16AU Board ON USB Cable compatible for arduino good quality low price + USB

  • Microcontroller CH340

  • Operating Voltage 5V

  • Input Voltage (recommended) 7-12V

  • Input Voltage (limits) 6-20V

  • Digital I/O Pins 54 (of which 15 provide PWM output)

  • Analog Input Pins 16

  • DC Current per I/O Pin 40 mA

  • DC Current for 3.3V Pin 50 mA

  • Flash Memory 256 KB of which 8 KB used by bootloader

  • SRAM 8 KB

  • EEPROM 4 KB

  • Clock Speed 1 6 MHz

1PCS Mega 2560 R3 Mega2560 REV3 ATmega2560-16AU Board ON USB Cable compatible for arduino good quality low price + USB

   1x2560+USB cable

 

Hot Products / Hot products More
2017 - 11 - 20
TTGO LORA32 433/470/868/915Mhz ESP32 LoRa OLED 0.96 Inch Blue Display Bluetooth WIFI ESP-32 development board Module with AntennaThe 433/470/868/915MHz antenna needs to be in connection with the IPEX interface (if the antenna is not connected, it may damage the LoRa chip)Lithium battery charge and discharge circuit, when the battery is full, the blue LED will stop working. When using, pay attentio...
2017 - 10 - 16
describeTTGO ForArduino UNO LoRa v1.0 is a for Arduino development board with Lora chip. The development board MCU uses atmega328P, and the communication module adopts the Lora module of Anxin, which can realize the function of for Arduino and Lora wireless communication.   For more details, please see the link:https://github.com/LilyGO/UNO-TPLORA Invoice list:UNO LoRa MEGA328 ...
2017 - 10 - 17
describe:The 433MHz antenna must be used in conjunction with the IPEX interface (if the antenna is not connected, it may damage the LoRa chip)Lithium battery charging and discharging circuit, when the battery is full, the blue LED will stop working. When using, pay attention to the positive and negative of the battery, otherwise it will be damaged!Using the IO port touch screen touch signal input,...
2017 - 12 - 12
Description:the main chip using Lexin ESP32, Tensilica LX6 dual-core processor, clocked at 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b / g / N HT40 Wi-Fi transceiver, baseband, protocol stack and LWIP, integrated dual-mode Bluetooth (traditional Bluetooth and BLE low power Bluetooth). This product is based on the WIFI 32 added SX1276 chip, that is, LoRa ™ ...
  • 资质认证

    服务商100%实名审核认证

  • 支付安全

    明码标价支付及信息安全

  • 专人服务

    服务全程进行信息化监控

  • 售后无忧

    服务出问题客服经理全程跟进

The unified hotline:
0755-83380665
skype:seatechnolgy
@outlook.com


邮编:330520
  • Ali Express

  • ebay

  • "Sweeping" attention to us, more activities, surprise waiting for you
    E-mail: lily@lilygo.cc       Wechat: 13928411439       QQ :3004603945       Facebook: lily go
    Copyright ©2005 - 2013 Shenzhen Xin Yuan Electronic Technology Co., Ltd.
    犀牛云提供企业云服务