Shenzhen Xin Yuan Electronic Technology Co., Ltd.
 
手机官网
 
关注我们微信公众号
购物车图片 购物车 ( )
找服务 找新闻
热门搜索:
全部商品分类
服务热线: 0755-83380665
Products
产品名称:

HM-10 cc2540 cc2541 4.0 BLE bluetooth to uart transceiver Module Central & Peripheral switching iBeacon AirLocate

上市日期: 2017-08-28
建议销售价: 0

HM-10 CC2540 4,0 transceiver - year central peripheren bluetooth modul

warnung. the dies ist nicht um - 10. "are heißt worked cc41 has bluetooth modul.
the year transceiver bluetooth 4.0 - central peripheren hm 10 cc2540 module
 
- 100% brand new and high quality.
- to support central and peripheral, change of at command
support remote control mode, remote control device enables pio pin or change settings at commander when connected. (as iphone4s / 5 ipad, note2 etc.)
 
product parameters
. frequency 2.4 ghz ism band.
. modulation method: gfsk (gaussian frequency shift keying)
. rf power: ≤4dbm, class 2
 
. sensitivity: < - 84dbm to 0.1%.
. speed: asynchronous: 2.1 mbps / 160 kbps (max)
synchronous: 1 mbps / 1 mbps (max)
. security: authentication and encryption
. service: bluetooth spp (master & slave)
. performance: + 3.3vdc 50ma
. working temperature: - 5 ~ + 65 degrees celsius
 
.size: 26,9mm x 14mm x 2,2mm
 
. flash: with 256kb (or more)
additional introduction:
HC- 10 is bluetooth v4.0 to version. use ti chip. hm bluetooth module use csr bluecore or ti cc2540, master and slave roles
 
in one version, transmission and remote control version and pio condition acquisition functions in one, support the at command to change
 
module parameters, convenient and flexible. transmission version can be used to transmit data between two bluetooth devices. remote
tax version can be used to control a high or a low level output pio port without other mcu.
when commanders (new version v542)
(test command)
at + baud (query / set baud rate)
at + superfluous (query / set parity)
at + stop (query / set mosaic)
(query / set + uart uart rate, parity, and stop bit)
at + pio (query / set pio pins long command)
at + pio (query / set a pio pin sttus short command)
at + name query / set device friendly name)
in + pin (query / set device password code)
at + standard (reset device settings)
restart (reboot + device)
at + role (query / set device mode, master or slave)
at + clear (clear remote device address when)
at + conlast (try to combine successfully last link device)
at + version (show software version information)
at + help (show help information)
at + radd (query remote device address)
at + ladd (query even address)
at + tye (query / set whether the device boot immediately)
at + work (if device is not working, work, use command + tye)
at + tcon (query / set try to connect remote times)
at + type (query / set working type device, transceiver mode or remote mode)
at + start switch remote control mode transceiver mode)
at + buff (query / set how to use buffer data, duing mode switching time)
at + filt (query / set device when device search)
at + cod (query / set class of device. for example: phone, headset, etc.)
 
 
package include:

1 pieces  HM-10 cc2540 4.0 to bluetooth transceiver module to the central peripheral 

HM-10 cc2540 cc2541 4.0 BLE bluetooth to uart transceiver Module Central & Peripheral switching iBeacon AirLocate



Hot Products / Hot products More
2017 - 11 - 20
TTGO LORA32 433/470/868/915Mhz ESP32 LoRa OLED 0.96 Inch Blue Display Bluetooth WIFI ESP-32 development board Module with AntennaThe 433/470/868/915MHz antenna needs to be in connection with the IPEX interface (if the antenna is not connected, it may damage the LoRa chip)Lithium battery charge and discharge circuit, when the battery is full, the blue LED will stop working. When using, pay attentio...
2017 - 10 - 16
describeTTGO ForArduino UNO LoRa v1.0 is a for Arduino development board with Lora chip. The development board MCU uses atmega328P, and the communication module adopts the Lora module of Anxin, which can realize the function of for Arduino and Lora wireless communication.   For more details, please see the link:https://github.com/LilyGO/UNO-TPLORA Invoice list:UNO LoRa MEGA328 ...
2017 - 10 - 17
describe:The 433MHz antenna must be used in conjunction with the IPEX interface (if the antenna is not connected, it may damage the LoRa chip)Lithium battery charging and discharging circuit, when the battery is full, the blue LED will stop working. When using, pay attention to the positive and negative of the battery, otherwise it will be damaged!Using the IO port touch screen touch signal input,...
2017 - 12 - 12
Description:the main chip using Lexin ESP32, Tensilica LX6 dual-core processor, clocked at 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b / g / N HT40 Wi-Fi transceiver, baseband, protocol stack and LWIP, integrated dual-mode Bluetooth (traditional Bluetooth and BLE low power Bluetooth). This product is based on the WIFI 32 added SX1276 chip, that is, LoRa ™ ...
  • 资质认证

    服务商100%实名审核认证

  • 支付安全

    明码标价支付及信息安全

  • 专人服务

    服务全程进行信息化监控

  • 售后无忧

    服务出问题客服经理全程跟进

The unified hotline:
0755-83380665
skype:seatechnolgy
@outlook.com


邮编:330520
  • Ali Express

  • ebay

  • "Sweeping" attention to us, more activities, surprise waiting for you
    E-mail: lily@lilygo.cc       Wechat: 13928411439       QQ :3004603945       Facebook: lily go
    Copyright ©2005 - 2013 Shenzhen Xin Yuan Electronic Technology Co., Ltd.
    犀牛云提供企业云服务