LILYGO® TTGO LORA V1.3 868Mhz ESP32 Chip SX1276 Module 0.96 Inch OLED Screen WIFI And Bluetooth Development Board
![LILYGO® TTGO LORA V1.3 868Mhz ESP32 Chip SX1276 Module 0.96 Inch OLED Screen WIFI And Bluetooth Development Board]( "LILYGO® TTGO LORA V1.3 868Mhz ESP32 Chip SX1276 Module 0.96 Inch OLED Screen WIFI And Bluetooth Development Board")
| Hardware Specifications |
|
| Chipset | ESPRESSIF-ESP32 (Wi-Fi & Bluetooth)240MHz Xtensa® single-/dual-core 32-bit LX6 microprocessor |
| Module | SX1276 |
| FLASH | QSPI flash 4MB |
| SRAM | 520 kB SRAM |
| Button | BOOT,REST |
| USB to TTL | CP2104 |
| Modular interface | UART,SPI,SDIO,I2C,PWM,I2S,ADC,DAC,Cap Sensor |
| On-board clock | 40MHz crystal oscillator |
| Working voltage | About 2.7V-3.6V |
|
|
| Sleep current | About 600uA |
| Working temperature range | -40℃ ~ +85℃ |
| Screen | OLED 0.96 Inch |
| SizeWeight | About 53.07mm*25.32mm*7.5mm |
| Weight | 6.5g |
Power Supply |
|
| Power Supply Input | USB 5V/1A |
| Charging current | 500mA |
| Battery Input | 3.7-4.2V |
| Charge IC |
|
| JST Connector | 2Pin 1.25mm |
| USB |
|
Wi-Fi |
|
| Standard | FCC/CE-RED/IC/TELEC/KCC/SRRC/NCC(esp32 chip) |
| Protocol | 802.11 b/g/n(802.11n，speed up to150Mbps)A-MPDU and A-MSDU polymerization，support 0.4μS Protection interval |
| Frequency range | 2.4GHz~2.5GHz(2400M~2483.5M) |
| Transmit Power | 22dBm |
| Communication distance | 300m |
Bluetooth |
|
| Protocol | Meet bluetooth v4.2BR/EDR and BLE standard |
| Radio frequency | With -97dBm sensitivity NZIF receiver Class-1,Class-2&Class-3 emitter AFH |
| Audio frequency | CVSD&SBC audio frequency |
Software specification |
|
| Wi-Fi Mode | Station/SoftAP/SoftAP+Station/P2P |
| Security mechanism | WPA/WPA2/WPA2-Enterprise/WPS |
| Encryption Type | AES/RSA/ECC/SHA |
| Firmware upgrade | UART download/OTA（Through network/host to download and write firmware） |
| Software Development | Support cloud server development /SDK for user firmware development |
| Networking protocol | IPv4、IPv6、SSL、TCP/UDP/HTTP/FTP/MQTT |
| User Configuration | AT + Instruction set, cloud server, android/iOSapp |
| OS | FreeRTOS |
Comparison between Lora V1.3 and Lora V1.0:
1.Product low power design
2.Optimize LORA RF circuit
3.Add battery voltage detection Pin IO35
More Infromation
https://github.com/LilyGO/TTGO-LORA32-V2.0/tree/LilyGO-V1.3-868
Product Pin
![LILYGO® TTGO LORA V1.3 868Mhz ESP32 Chip SX1276 Module 0.96 Inch OLED Screen WIFI And Bluetooth Development Board]( "LILYGO® TTGO LORA V1.3 868Mhz ESP32 Chip SX1276 Module 0.96 Inch OLED Screen WIFI And Bluetooth Development Board")
Product Size
![LILYGO® TTGO LORA V1.3 868Mhz ESP32 Chip SX1276 Module 0.96 Inch OLED Screen WIFI And Bluetooth Development Board]( "LILYGO® TTGO LORA V1.3 868Mhz ESP32 Chip SX1276 Module 0.96 Inch OLED Screen WIFI And Bluetooth Development Board")
Product Detail
Note:Product does not have solder pins
![LILYGO® TTGO LORA V1.3 868Mhz ESP32 Chip SX1276 Module 0.96 Inch OLED Screen WIFI And Bluetooth Development Board]( "LILYGO® TTGO LORA V1.3 868Mhz ESP32 Chip SX1276 Module 0.96 Inch OLED Screen WIFI And Bluetooth Development Board")
![LILYGO® TTGO LORA V1.3 868Mhz ESP32 Chip SX1276 Module 0.96 Inch OLED Screen WIFI And Bluetooth Development Board]( "LILYGO® TTGO LORA V1.3 868Mhz ESP32 Chip SX1276 Module 0.96 Inch OLED Screen WIFI And Bluetooth Development Board")
Shpping List
1 X Lora V1.3
1 X Power cable
2 X Pin
1 X Antenna
![LILYGO® TTGO LORA V1.3 868Mhz ESP32 Chip SX1276 Module 0.96 Inch OLED Screen WIFI And Bluetooth Development Board]( "LILYGO® TTGO LORA V1.3 868Mhz ESP32 Chip SX1276 Module 0.96 Inch OLED Screen WIFI And Bluetooth Development Board")