Products
产品名称:

LILYGO® TTGO T-Beam V1.1 ESP32 433/868/915/923Mhz WiFi Bluetooth Module ESP32 GPS NEO-6M SMA 18650 Battery Holder With OLED

上市日期: 2019-08-20
建议销售价: 0

TTGO T-Beam ESP32 433/868/915/923Mhz WiFi Wireless Bluetooth Module ESP 32 GPS NEO-6M SMA LORA 32 18650 Battery Holder With OLED

LILYGO® TTGO T-Beam V1.1 ESP32 433/868/915/923Mhz WiFi Bluetooth Module ESP32 GPS NEO-6M SMA 18650 Battery Holder With OLED

 

Product DemonstrationNote:OLED is not soldered to T-BEAM)

Product Features

ESP32
Lastest ESP32 Version: REV1
WIFI
Bluetooth 
8MB PSRAM
4MB Flash
3D Antenna
LORA

 

Product Description
Working voltage: 1.8~3.7v
Acceptable current:10~14mA
Transmit current: 120mA@+20dBm
                               90mA@+17dBm
                               29mA@+13dBm
Operating frequency: 433/470MHz(433HMz version) /868M/915M(868MHz version)
Transmit power: +20dBm
Receive sensitivity :-139dBm@LoRa &62.5Khz&SF=12&146bps
-136dBm@LoRa &125Khz&SF=12&293bps
-118dBm@LoRa &125Khz&SF=6&9380bps
-123dBm@FSK&5Khz&1.2Kbps
Frequency error:+/-15KHz
FIFO space :64Byte
Data rate :1.2K~300Kbps@FSK
                   0.018K~37.5Kbps@LoRa        
Modulation Mode :FSK,GFSK,MSK,GMSK,LoRa TM,OOK
Interface form :SPI
Sleep current :0.2uA@SLEEP
                           1.5uA@IDLE
Operating temperature :-40℃- +85℃
Digital RSSI function
Automatic frequency correction
Automatic gain control 
Low voltage detection 
Fast wake-up and frequency hopping
Highly configurable data packet handler

 

GPS
GPS modules NEO-6M, 3V-5V power supply Universal
Destined module with ceramic antenna, signal super
Save the configuration parameter data EEPROM Down
With data backup battery
There are LED signal indicator
Default Baud Rate: 9600

 

Power


Power Supply Input USB 5V/1A
Charging current 500mA
Battery Input  3.7-4.2V
Charge IC AXP192

 

OLED Description:
1.Size:  0.96 inch
2.High resolution: 128 * 64
3.Color:  white
4.Viewing angle:  > 160 °
5.Driver IC:  SSD1306
6.Working temperature -30  celcius ~ 80  celcius
7.Module volume (generous):  27.0MM * 27.0MM * 4.1MM
8.Supports many control chip Fully compatible with Arduino, 51 series, MSP430        series,STM32/2, CSR chip, etc.  (a lot of routines for reference)
9.Wide voltage supportwithout any modification, directly supports 3.3V ~ 5V DC
10.Ultra-low power consumption: Normal operation Is 0.04W
11.IO port occupies minimal display: The IIC communication,as long as the two IO ports

LILYGO® TTGO T-Beam V1.1 ESP32 433/868/915/923Mhz WiFi Bluetooth Module ESP32 GPS NEO-6M SMA 18650 Battery Holder With OLED

LILYGO® TTGO T-Beam V1.1 ESP32 433/868/915/923Mhz WiFi Bluetooth Module ESP32 GPS NEO-6M SMA 18650 Battery Holder With OLED

 

More information:

https://github.com/lyusupov/SoftRF/wiki/Prime-Edition-MkII

https://github.com/LilyGO/SoftRF 

https://github.com/Xinyuan-LilyGO/LilyGO-T-Beam

Pin Schematic

LILYGO® TTGO T-Beam V1.1 ESP32 433/868/915/923Mhz WiFi Bluetooth Module ESP32 GPS NEO-6M SMA 18650 Battery Holder With OLED

 

Size picture

 

 

LILYGO® TTGO T-Beam V1.1 ESP32 433/868/915/923Mhz WiFi Bluetooth Module ESP32 GPS NEO-6M SMA 18650 Battery Holder With OLED

 

Shipping List

433MHz/868MHz Version

1 X TTGO T-Beam ESP32
1 X 433MHz/868MHz Antenna      
1 X 0.96 inch 128X64  OLED
2 X Pin 
Note: OLED is not soldered to T-BEAM

 

LILYGO® TTGO T-Beam V1.1 ESP32 433/868/915/923Mhz WiFi Bluetooth Module ESP32 GPS NEO-6M SMA 18650 Battery Holder With OLED

 

915MHz/923MHz Version

 

1 X TTGO T-Beam ESP32
1 X 915MHz/923MHz Antenna
1 X 0.96 inch 128X64 OLED
2 X Pin  
Note:OLED is not soldered to T-BEAM

  

LILYGO® TTGO T-Beam V1.1 ESP32 433/868/915/923Mhz WiFi Bluetooth Module ESP32 GPS NEO-6M SMA 18650 Battery Holder With OLED

 

LILYGO® TTGO T-Beam V1.1 ESP32 433/868/915/923Mhz WiFi Bluetooth Module ESP32 GPS NEO-6M SMA 18650 Battery Holder With OLED

 

LILYGO® TTGO T-Beam V1.1 ESP32 433/868/915/923Mhz WiFi Bluetooth Module ESP32 GPS NEO-6M SMA 18650 Battery Holder With OLED

 

LILYGO® TTGO T-Beam V1.1 ESP32 433/868/915/923Mhz WiFi Bluetooth Module ESP32 GPS NEO-6M SMA 18650 Battery Holder With OLED


Hot Products / Hot products More
2020 - 07 - 14
LILYGO® TTGO T-Watch T-Fingerprint ESP32 Main Chip 1.54 Inch Touch Screen Expansion Fingerprint Sensor Development HardwareProduct DescriptionHardware Specifications ChipsetESP32,dual-core MCU,PMU power managementFLASHQSPI flash 16MB SRAM 520 kB SRAM  /  PSRAM  8MBButtonPower key , IO36Extended functionReference enhanced version and sensor kitUSB to TTLCP2104Modu...
2020 - 05 - 13
LILYGO®TTGO T-Watch ESP32 Chip Programmable Wearable Environment Interaction Expandable Silicone Shell Gel Full Coverage Kit   Product DetailShipping List1 X White T-Watch Basic1 X Yellow plastic sleeve1 X Portable Date Cable
2020 - 05 - 09
LILYGO®TTGO T-Watch-K210 AIOT AI Face Recognition Programmable Development Hardware Built-in OV2640 LensMore Informationhttps://github.com/Xinyuan-LilyGO/MaixPy  Product Pin   Shipping List1 X T-Watch K210 AIOT1 X Charing Cable
2020 - 04 - 25
LILYGO® TTGO T-Watch-2020 ESP32 Main Chip 1.54 Inch Touch Display Programmable Wearable Environmental Interaction Product DescriptionHardware SpecificationsChipsetESP32, dual-core MCU, PMU power managementFLASHQSPI flash 16MB SRAM 520 KB SRAM / PSRAM  8MBButtonPower key USB to TTLCP2104On-board clock40MHz crystal oscillator Working voltage2.7V-3.6VWorking tempera...
Copyright © 2020 深圳市芯元电子科技有限公司 版权所有