Products
产品名称:

LILYGO® TTGO LORA SX1278 ESP32 0.96 OLED 32Mbit 433Mhz For Arduino

上市日期: 2019-08-19
建议销售价: 0

TTGO LORA SX1278 ESP32 0.96 OLED 32Mbit 433Mhz For Arduino

Description:

The 433MHz antenna must be used in conjunction with the IPEX interface (if the antenna is not connected, The signal will weaken)

Lithium battery charging and discharging circuit, when the battery is full, the LED will stop working. When using, pay attention to '+' and '-' of the battery, otherwise it will be damaged!
Using the IO port touch screen touch signal input, you need to add the 100nF pull-down capacitor at this pin!
 
Product Properties:
This product is a  4Mt bytes (32 Mt bit)  chip based on ESP32 WIFI increased OLED, namely LoRa remote modem, 433MHz frequency, high sensitivity is about -148dBm, +20dBm output power, high reliability, long transmission distance.
The 4Mt bytes (32 Mt bit)   Flash on board, Wi-Fi antenna, 0.96 inch blue OLED display, lithium battery charging circuit, CP2102 interface and USB serial chip, the perfect support for Arduino development environment, can be used for program verification and product development is very simple and fast.
Operating voltage: 3.3V to 7V
Operating temperature range: -40 degrees C to +90 degrees C
Support for Sniffer, Station, softAP, and Wi-Fi Direct modes
Data rates: 150 Mbps@11n HT40, 72 Mbps@11n HT20, 54 Mbps@11g, 11 Mbps@11b
Transmit power: 19.5 dBm@11b, 16.5 dBm@11g, 15.5 dBm@11n
Receiver sensitivity up to -98 dBm
 
 
UDP sustained throughput of 135 Mbps
LILYGO® TTGO LORA SX1278 ESP32 0.96 OLED 32Mbit 433Mhz For Arduino
 

 

Pin reference description

LILYGO® TTGO LORA SX1278 ESP32 0.96 OLED 32Mbit 433Mhz For Arduino

For more product information, click https://drive.google.com/file/d/1L8ll-DeAC2SATBZn0-KbSaZsrinbnXkF/view

 

 

 

Test details

LILYGO® TTGO LORA SX1278 ESP32 0.96 OLED 32Mbit 433Mhz For Arduino

Click links for more details: https://eyun.baidu.com/s/3hsiTNgg

Test Code  :https://github.com/LilyGO/TTGO-LORA32-V2.0/tree/LilyGO-patch-1                                                 

Note:This product does not include the battery.

Shipping list

433m Spring Antenna*1
ESP32 OLED *1
Line *1
Pin*2
 
LILYGO® TTGO LORA SX1278 ESP32 0.96 OLED 32Mbit 433Mhz For Arduino
 
 
 
 
LILYGO® TTGO LORA SX1278 ESP32 0.96 OLED 32Mbit 433Mhz For Arduino


Hot Products / Hot products More
2020 - 07 - 14
LILYGO® TTGO T-Watch T-Fingerprint ESP32 Main Chip 1.54 Inch Touch Screen Expansion Fingerprint Sensor Development HardwareProduct DescriptionHardware Specifications ChipsetESP32,dual-core MCU,PMU power managementFLASHQSPI flash 16MB SRAM 520 kB SRAM  /  PSRAM  8MBButtonPower key , IO36Extended functionReference enhanced version and sensor kitUSB to TTLCP2104Modu...
2020 - 05 - 13
LILYGO®TTGO T-Watch ESP32 Chip Programmable Wearable Environment Interaction Expandable Silicone Shell Gel Full Coverage Kit   Product DetailShipping List1 X White T-Watch Basic1 X Yellow plastic sleeve1 X Portable Date Cable
2020 - 05 - 09
LILYGO®TTGO T-Watch-K210 AIOT AI Face Recognition Programmable Development Hardware Built-in OV2640 LensMore Informationhttps://github.com/Xinyuan-LilyGO/MaixPy  Product Pin   Shipping List1 X T-Watch K210 AIOT1 X Charing Cable
2020 - 04 - 25
LILYGO® TTGO T-Watch-2020 ESP32 Main Chip 1.54 Inch Touch Display Programmable Wearable Environmental Interaction Product DescriptionHardware SpecificationsChipsetESP32, dual-core MCU, PMU power managementFLASHQSPI flash 16MB SRAM 520 KB SRAM / PSRAM  8MBButtonPower key USB to TTLCP2104On-board clock40MHz crystal oscillator Working voltage2.7V-3.6VWorking tempera...
Copyright © 2020 深圳市芯元电子科技有限公司 版权所有