Products
产品列表
LILYGO® TTGO SX1276 868/915MHz And SX1278 433MHz Lora Mini Small Chip Wi-Fi And Bluetooth Module Product  DescriptionPin Diagram: 1.  Lora—SX1276 868MHz   2.  Lora—SX1278 433MHz    Size Chart  Product Detail1.  Lora—SX1276 868MHz 2.  Lora—SX1278 433MHz  Shipping ListOption 11 X SX1276 ModuleOption 21 X SX1278 Module
LILYGO® TTGO Meshtastic T-Beam V1.1 ESP32 433/868/915/923Mhz WiFi Bluetooth ESP32 GPS NEO-6M SMA 18650 Battery Holder With OLED Product Demonstration(Note:OLED is not soldered to T-BEAM)Product FeaturesESP32Lastest ESP32 Version: REV1WIFIBluetooth 8MB PSRAM4MB Flash3D AntennaLORA Product DescriptionWorking voltage: 1.8~3.7vAcceptable current:10~14mATransmit current: 120mA@+20dBm                               90mA@+17dBm                               29mA@+13dBmOperating frequency: 433/470MHz(433HMz version) /868M/915M(868MHz version)Transmit power: +20dBmReceive sensitivity :-139dBm@LoRa &62.5Khz&SF=12&am...
LILYGO® TTGO T-Higrow LoRa Shield 868Mhz Function Expansion BoardProduct DescriptionThis example shows how to use LilyGO T-HiGrow + T-HiGrow Lora Sheld to connect to TTN and display the data in Cayenne,The sample code does not do any power optimization, only data demonstration. Steps:1.Move or copy the folders in the libdeps directory to C:\Documents\Arduino\libraries2.Replace APPEUI, DEVEUI, APPKEY in the sketch with the three assigned by TTN. 3.Log in to Cayenne, add the device as shown in the figure below. Select CayenneLPP in the third column, fill in DevEUI in TTN in DevEUI in the 4.fourth column, and then add device  4.Finally, if the data is uploaded successfully, the dashboard will automatically add controls. More Informationhttps://github.com/Xinyuan-...
LILYGO®&SoftRF TTGO T-Motion S76G Lora Chip LORA 868/915/923Mhz Antenna GPS Antenna USB Connector Development BoardProduct DescriptionHardware specificationsMain chip: S76G Lora ChipButton: BOOTCar clock: 26MHz active crystalAntenna Model: LORA 868MHZ GPS AntennaOperating temperature range: -45-80 ℃Size: 78.12mm * 25.40mm * 62.67mmWeight: 30g Power Specifications Working voltage: 5v inputWorking current: About 18mAUSB: USB male  More information:https://github.com/lyusupov/SoftRF/tree/master/software/firmware/binaries/STM32/S76Ghttps://github.com/lyusupov/SoftRF/wiki/AcSiP-S7xG-flashing-instructionshttps://github.com/Xinyuan-LilyGO/LilyGO-T-Motion Product PIN Diagram  Size Chart Product Detail Product Usage Display   Ship...
LILYGO® TTGO T-Beam V0.7 ESP32 868/915Mhz WiFi Wireless Bluetooth Module GPS NEO-6M SMA LORA 32 18650 Battery Holder Product FeaturesESP32Lastest ESP32 Version: REV1WIFIBluetooth 8MB PSRAM4MB Flash3D Antenna LORAProduct DescriptionWorking voltage: 1.8~3.7vAcceptable current:10~14mATransmit current: 120mA@+20dBm                                        90mA@+17dBm                                        29mA@+13dBmOperating frequency: 433/470MHz(433HMz version) /868M/915M(868MHz version)Transmit power: +20dBmReceive sensitivity :-139dBm@LoRa &62.5Khz&SF=12&146bps-13...
LILYGO® TTGO T-Solar 433/868/915MHz Solar Power Development Board STM8L152 CPU SX1262 Lora With Antenna Product DescriptionChipsetASR6505CPUSTM8L152LoRaSX1262Frequeccy Range150MHZ-960MHzMaximum Power+21dBm constant RF outputRX Sensitivity’-140dBmEmbedded memorieFlash 64KB, SRAM 4KB. EEPROM 2KBPeripherals30x configurable GPIOS,1xIC, 2xUART, 1xSWIM: 1xSPL, 3xADCRX mode CurrrentTX mode CurentDeep Sleep Mode SurrentTemperature Storage:-55-125℃Operating:40-85℃HumidityStorage: 5-95%(Non-Condensing)Operating: 10-95%(Non- Condensing)Charging Charging Current 780maCharging TP4056Charging statusRed light on,Green light offVoltage full stateRed light off,Green light onUndervoltageRed light off,Green light off battery temperature is too high or too low stateRed light...
LILYGO®TTGO LORA32 V2.0 433/868/915Mhz ESP32 LoRa OLED 0.96 Inch SD Card Display Bluetooth WIFI ESP32 Module With Antenna   Product DescriptionWorking voltage: 1.8~3.7vAcceptable current:10~14mATransmit current: 120mA@+20dBm                              90mA@+17dBm                              29mA@+13dBmOperating frequency: 433/470MHz(433HMz version) / 868M/915M(868MHz Version)Transmit power: +20dBmReceive sensitivity :-139dBm@LoRa &62.5Khz&SF=12&146bps-136dBm@LoRa &125Khz&SF=12&293bps-118dBm@LoRa &125Khz&SF=6&9380bps-123dBm@FSK&5Khz&1.2KbpsFrequency error:+/-15KH...
LILYGO® TTGO ESP32-Paxcounter LoRa32 V2.1 1.6 Version 433/868/915MHZ LoRa ESP-32 OLED 0.96 Inch SD Card Bluetooth WIFI Module   Product DescriptionWorking voltage: 1.8~3.7vAcceptable current:10~14mATransmit current: 120mA@+20dBm                              90mA@+17dBm                              29mA@+13dBmOperating frequency: 868M/915MHzTransmit power: +20dBmReceive sensitivity :-139dBm@LoRa &62.5Khz&SF=12&146bps          -136dBm@LoRa &125Khz&SF=12&293bps          -118dBm@LoRa &125Khz&SF=6&9380bps     ...
LILYGO® TTGO LORA V1.3 868Mhz  ESP32 Chip SX1276 Module 0.96 Inch OLED  Screen WIFI And Bluetooth Development Board Hardware SpecificationsChipsetESPRESSIF-ESP32 (Wi-Fi & Bluetooth)240MHz Xtensa® single-/dual-core 32-bit LX6 microprocessorModuleSX1276FLASHQSPI flash 4MBSRAM 520 kB SRAMButtonBOOT,RESTUSB to TTLCP2104Modular interfaceUART,SPI,SDIO,I2C,PWM,I2S,ADC,DAC,Cap SensorOn-board clock40MHz crystal oscillator Working voltage About 2.7V-3.6VSleep current About 600uAWorking temperature range -40℃ ~ +85℃ScreenOLED 0.96 InchSizeWeightAbout 53.07mm*25.32mm*7.5mmWeight6.5g Power SupplyPower Supply InputUSB 5V/1ACharging current500mABattery Input 3.7-4.2VCharge ICJST Connector2Pin 1.25mmUSB Wi-FiStandardFCC/CE-RED/...
TTGO LoRa32 V2.1_1.6 version 433/868/915Mhz ESP32 LoRa OLED 0.96 Inch SD Card Bluetooth WIFI wireless Module ESP-32 SMA    Product DescriptionWorking voltage: 1.8~3.7vAcceptable current:10~14mATransmit current: 120mA@+20dBm                              90mA@+17dBm                              29mA@+13dBmOperating frequency: 868M/915MHzTransmit power: +20dBmReceive sensitivity :-139dBm@LoRa &62.5Khz&SF=12&146bps          -136dBm@LoRa &125Khz&SF=12&293bps          -118dBm@LoRa &125Khz&SF=6&9380bps     ...
TTGO LORA SX1278 ESP32 0.96 OLED 32Mbit 433Mhz For ArduinoDescription:The 433MHz antenna must be used in conjunction with the IPEX interface (if the antenna is not connected, The signal will weaken)Lithium battery charging and discharging circuit, when the battery is full, the LED will stop working. When using, pay attention to '+' and '-' of the battery, otherwise it will be damaged!Using the IO port touch screen touch signal input, you need to add the 100nF pull-down capacitor at this pin!Product Properties:This product is a  4Mt bytes (32 Mt bit)  chip based on ESP32 WIFI increased OLED, namely LoRa remote modem, 433MHz frequency, high sensitivity is about -148dBm, +20dBm output power, high reliability, long transmission distance.The 4Mt bytes (32 Mt bit)&...
describeTTGO ForArduino UNO LoRa v1.0 is a for Arduino development board with Lora chip. The development board MCU uses atmega328P, and the communication module adopts the Lora module of Anxin, which can realize the function of for Arduino and Lora wireless communication.   For more details, please see the link:https://github.com/LilyGO/UNO-TPLORA Invoice list:UNO LoRa MEGA328 433MHZ SX1278*1433m Spring Antenna*1
31页次1/3HomePrev123Nextlast
Copyright © 2020 深圳市芯元电子科技有限公司 版权所有