Shenzhen Xin Yuan Electronic Technology Co., Ltd.
购物车图片 购物车 ( )
找服务 找新闻
TTGO  WiFi & Bluetooth 18650 Batterie seat ESP32 4 MB SPI Flash 4 MB Psram CharacteristicsLastest ESP32 Version: REV1WIFIBluetooth4 MB Flash4 MB PSRAM18650 Batterie seatTF Reader3D ANTENNA2A Battery ManagementLED indicator: There are 4 LEDs show the battery status in real time.Power button: Click one time will start. Fast click 2 times will shut down.Navigation button changed (IO34, IO35, IO39) Use Demonstration* * Be careful + and -. if you put the wrong direction of the battery,will destruct the charging chip.Shipping List(not include SD card and battery)1 X TTGO  WiFi & Bluetooth 18650 Batterie seat ESP32 4 MB SPI Flash 4 MB Psram2 X Pin
BME280 Moudle Temperature Humidity Air Pressure, Trinity Environmental Sensor   Product Description Working voltage: 3.3~5VWorking current: 2mAWorking temperature: -40 ° C ~ +85 ° CTemperature detection range: -40 ° C ~ +85 ° C, resolution 0.1 ° C, error ± 0.5 ° CHumidity detection range: 0~100%RH, resolution 0.1%RH, error ±2%RHPressure detection range: 300~1100hPaHumidity measurement response time: 1sModule size: 22 * 25 mmMounting hole size: inner diameter 3.1mm / outer diameter 6mmWeight: 12g    Product DetailIt Can be used with T-Camera    Shipping List1 X BME280 Moudle1 x  Data line
TTGO ESP8266 0.91 Inch OLED For Arduino For Nodemcu Development Board Hardware Specifications Master chip  ESPRESSIF-ESP8266FLASH 32 M BitsKEY reset,prgdispaly 0.91-inch 128*32 OLEDPower indicator lamp redUSB to TTL CP2102modular  interface read , write , IIC , SPI , the middle , PWM , ect...on-board clock 26MHz crystal oscillator working voltage 3.3V-7Vworking current about 70mAworking temperature range  -40℃ ~ 90℃size 50.86mm*18.2mm*6.96mm Power Supply Specifications Power Supply USB 5V/1Acharging current 500mAbattery 3.7V lithium battery  Product Detail   For more product information, click Di...
TTGO LORA32 V2.0 433MHz/868/915Mhz ESP32 LoRa OLED 0.96 Inch SD Card Display Bluetooth WIFI ESP32 ESP-32 Module With Antenna  Product DescriptionWorking voltage: 1.8~3.7vAcceptable current:10~14mATransmit current: 120mA@+20dBm                              90mA@+17dBm                              29mA@+13dBmOperating frequency: 433/470MHz(433HMz version) /868M/915M(868MHz version)Transmit power: +20dBmReceive sensitivity :-139dBm@LoRa &62.5Khz&SF=12&146bps-136dBm@LoRa &125Khz&SF=12&293bps-118dBm@LoRa &125Khz&SF=6&9380bps-123dBm@FSK&5Khz&1.2KbpsFrequency error:+/-15K...
Black PVC Case And Soft Rubber Sleeve For TTGO T-Camera ESP32WROVER & PSRAM Camera Module DescriptionBlack PVC Case:TAKACHI brand CS75N-B model CNC forming and PVC panelSoft Rubber Sleeve:TAKACHI brand CSSC75-OP-B model Black PVC CaseIt blocks dust and protects the camera module. The back of the case is also equipped with a small rope hole for easy carrying.At the same time, a microphone wiring port is reserved on the protective case. Soft Rubber SleeveThe black soft rubber sleeve provides a comfortable touch and provides better friction, which is not easy to slip from the hand, making it easy for buyers to use. Product DetailBlack PVC Case And Soft Rubber Sleeve For TTGO T-CameraNotice:If you buy a PVC case, it does not include a soft rubber sle...
TTGO 4Mt Bytes (32 Mt bit) Pro ESP32 OLED V2.0 For Arduino  WiFi Modules+Bluetooth Double ESP-32 ESP8266Describe:1.The main control chip using ESP32, Tensilica dual core processor, clocked at 240MHz,computing capacity of up to 600DMIPS, 520 SRAM, 802.11 KB chip b/g/n HT40 WiFi transceiver, baseband, and LWIP protocol stack, Bluetooth (Bluetooth dualmode integrated traditional and BLE low-power Bluetooth).2.Onboard 4 Mt bytes (32 Mt bit) , Flash, and Wi-Fi antennas.3.0.96 inch White OLED display.4.Lithium battery charging cir...
TTGO LORA32 V2.0 433/868/915MHz ESP32 LoRa OLED 0.96 Inch SD Card Display Bluetooth WIFI ESP32 ESP-32 Module With Antenna   Product DescriptionWorking voltage: 1.8~3.7vAcceptable current:10~14mATransmit current: 120mA@+20dBm                              90mA@+17dBm                              29mA@+13dBmOperating frequency: 433/470MHz(433HMz version) / 868M/915M(868MHz Version)Transmit power: +20dBmReceive sensitivity :-139dBm@LoRa &62.5Khz&SF=12&146bps-136dBm@LoRa &125Khz&SF=12&293bps-118dBm@LoRa &125Khz&SF=6&9380bps-123dBm@FSK&5Khz&1.2KbpsFrequency error:+/-15KH...
TTGO ZERO ESP32 4MB PSRAM 4MB Flash WiFi Module Bluetooth ESP32-WROVER Micropython  Pin reference descriptionEspressif official ESP32-WROVER moduleLastest ESP32 Version: REV1WIFI  Bluetooth   4MB Flash  4MB PSRAMDefault firmware: Latest Micropython firmwareBattery Connector: PH-2 2.0mm2A Battery ManagementPower button: Click one time will start. Fast click 2 times will shut down.Protection: Short protection. Over charging protection. Overflowing   Shipping List:1 X ESP32-WROVER Development board Module2 X Pin
RF Coaxial Connector SMA To IPEX ConnectorProduct UsePackage List1 X  RF coaxial connector SMA to IPEX connector
TTGO T2 ESP32 0.95 OLED SD card  WiFi + Bluetooth Module Product Details Pin diagramFor more product information, please visit: Use Example(This product does not include battery) Shipping List:ESP32 T2*1Pin *2Power Cable *1
TTGO ESP32 SX1276 LoRa 868 / 915MHz Bluetooth WI-FI Lora Internet Antenna Development Board For Arduino Description:The main chip using ESPRESSIF ESP32, Tensilica LX6 dual-core processor, clocked at 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b / g / N HT40 Wi-Fi transceiver, baseband, protocol stack and LWIP, integrated dual-mode Bluetooth (traditional Bluetooth and BLE low power Bluetooth).This product is based on the WI-FI 32 added SX1276 chip, that is, LoRa ™ remote modem, 868/915MHz frequency, about -148dBm high sensitivity, +20 dBm power output, high reliability.Onboard 4M byte(32M Bit) Flash, Wi-Fi antenna,  lithium battery charging circuit and interface, CP2102 USB to serial chip, the perfect support for Arduino development env...
TTGO T8 V1.7 ESP32 4MB PSRAM TF CARD 3D ANTENNA WiFi&Buletooth FeaturesEspressif official ESP32-WROVER moduleLastest ESP32 Version: REV1WIFI Bluetooth  4MB Flash 4MB PSRAMLithium battery interface, 500mA Max charging current TF CARD3D ANTENNAPin DescriptionProduct Details    Shipping List:T8 V1.1 TF CARD 3D ANTENNA ESP32 Rev1 *1Pin *2Power Cable *1
  • 资质认证


  • 支付安全


  • 专人服务


  • 售后无忧


The unified hotline:
0086 13928411439

  • Aliexpress

  • ebay

  • "Sweeping" attention to us, more activities, surprise waiting for you
    E-mail:       Wechat: 13928411439       QQ :3004603945

    Copyright ©2005 - 2013 Shenzhen Xin Yuan Electronic Technology Co., Ltd.