产品列表
describeTTGO ForArduino UNO LoRa v1.0 is a for Arduino development board with Lora chip. The development board MCU uses atmega328P, and the communication module adopts the Lora module of Anxin, which can realize the function of for Arduino and Lora wireless communication. For more details, please see the link:https://github.com/LilyGO/UNO-TPLORA Invoice list:UNO LoRa MEGA328 433MHZ SX1278*1433m Spring Antenna*1
2pcs/lot SX1278 LoRa ESP32 Bluetooth WI-FI Lora Internet Antena Development BoardDescription:The main chip using ESP32, Tensilica LX6 dual-core processor, clocked at 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b / g / N HT40 Wi-Fi transceiver, baseband, protocol stack and LWIP, integrated dual-mode Bluetooth (traditional Bluetooth and BLE low power Bluetooth).This product is based on the WIFI 32 added SX1278 chip, that is, LoRa ™ remote modem, 433MHz frequency, about -148dBm high sensitivity, +20 dBm power output, high reliability.Onboard 32MBit Flash, Wi-Fi antenna, lithium battery charging circuit and interface, CP2102 USB to serial chip, the perfect support for Arduino development environment, can be very simple and fast for program ...
TTGO LORA32 868/915Mhz ESP32 LoRa OLED 0.96 Inch Display Bluetooth WIFI ESP32 ESP-32 Module with AntennaDescribe:The 868/915MHz antenna needs to be in connection with the IPEX interface (if the antenna is not connected, it may damage the LoRa chip)Lithium battery charge and discharge circuit, when the battery is full, the blue LED will stop working. When using, pay attention to “+”and '-' of the battery, otherwise it will be unstable signal reception！With IO port touch screen touch signal input, you need to add the 100nF pull-down capacitor to this pin!Example:This product is a SX1276 chip based on ESP32 WIFI increased OLED, namely LoRa remote modem, 868-915MHz frequency, high sensitivity is over-148dBm, + 20dBm output power, high reliability, long transmission distance.the on...
2pcs/sets TTGO LORA SX1278 ESP32 0.96 OLED 32Mt bit (4MB) 433Mhz For Arduino Product DescriptionThe 433MHz antenna must be used in conjunction with the IPEX interface (If the antenna is not connected, the signal may be almost).Lithium battery charging and discharging circuit, when the battery is full, the blue LED will stop working. When using, pay attention to “+” and “-” of the battery, the signal may be almost！Using the IO port touch screen touch signal input, you need to add the 100nF pull-down capacitor at this pin! Example:This product is a SX1278 chip based on ESP32 WIFI increased OLED, namely LoRa remote modem, 433MHz frequency, high sensitivity is about -148dBm, +20dBm output power, high reliability, long transmission distance.The 4Mt bytes (32 Mt bit)&#...
TTGO 2Pcs/lot ESP32 SX1276 LoRa 868 / 915MHz Bluetooth WI-FI Lora Internet Antenna Development Board For ArduinoDescription:The main chip using ESP32, Tensilica LX6 dual-core processor, clocked at 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b / g / N HT40 Wi-Fi transceiver, baseband, protocol stack and LWIP, integrated dual-mode Bluetooth (traditional Bluetooth and BLE low power Bluetooth).This product is based on the WIFI 32 added SX1276 chip, that is, LoRa ™ remote modem, 868/915MHz frequency, about -148dBm high sensitivity, +20 dBm power output, high reliability.Onboard 128MBit Flash, Wi-Fi antenna, lithium battery charging circuit and interface, CP2102 USB to serial chip, the perfect support for Arduino development environment, can be ...
TTGO LORA32 V2.0 433MHz/868/915Mhz ESP32 LoRa OLED 0.96 Inch SD Card Display Bluetooth WIFI ESP32 ESP-32 Module With Antenna Product DescriptionWorking voltage: 1.8~3.7vAcceptable current：10~14mATransmit current: 120mA@+20dBm 90mA@+17dBm 29mA@+13dBmOperating frequency: 433/470MHz(433HMz version) /868M/915M(868MHz version)Transmit power: +20dBmReceive sensitivity :-139dBm@LoRa &62.5Khz&SF=12&146bps-136dBm@LoRa &125Khz&SF=12&293bps-118dBm@LoRa &125Khz&SF=6&9380bps-123dBm@FSK&5Khz&1.2KbpsFrequency error：+/-15K...
TTGO LORA32 V2.0 433/868/915MHz ESP32 LoRa OLED 0.96 Inch SD Card Display Bluetooth WIFI ESP32 ESP-32 Module With Antenna Product DescriptionWorking voltage: 1.8~3.7vAcceptable current：10~14mATransmit current: 120mA@+20dBm 90mA@+17dBm 29mA@+13dBmOperating frequency: 433/470MHz(433HMz version) / 868M/915M(868MHz Version)Transmit power: +20dBmReceive sensitivity :-139dBm@LoRa &62.5Khz&SF=12&146bps-136dBm@LoRa &125Khz&SF=12&293bps-118dBm@LoRa &125Khz&SF=6&9380bps-123dBm@FSK&5Khz&1.2KbpsFrequency error：+/-15KH...
TTGO ESP32 SX1276 LoRa 868 / 915MHz Bluetooth WI-FI Lora Internet Antenna Development Board For Arduino Description:The main chip using ESPRESSIF ESP32, Tensilica LX6 dual-core processor, clocked at 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b / g / N HT40 Wi-Fi transceiver, baseband, protocol stack and LWIP, integrated dual-mode Bluetooth (traditional Bluetooth and BLE low power Bluetooth).This product is based on the WI-FI 32 added SX1276 chip, that is, LoRa ™ remote modem, 868/915MHz frequency, about -148dBm high sensitivity, +20 dBm power output, high reliability.Onboard 4M byte(32M Bit) Flash, Wi-Fi antenna, lithium battery charging circuit and interface, CP2102 USB to serial chip, the perfect support for Arduino development env...
TTGO T-Deer Pro Mini Lora V02 LoRa 433MHz/868MHz/915MHz Mega328 For Arduino Hardware SpecificationsChipsetAtmega328PFLASHQSPI flash/SRAM, up to 4 x 16 MBKEYresetPower indicator lampredlora TTGO LORA 433Mon-board clock16MHz crystal oscillator working voltage2.3V-3.6Vworking currentabout 8mAworking temperature range-40℃ ~ +85℃size51.13mm*27.25mm*12.29mmPower Supply SpecificationsPower SupplyUSB 5V/1Acharging current500mAbattery3.7V lithium battery Notice:Plug the jumper when using the LORA, and disconnect the jumper when downloading the boot load Pin reference descriptionProduct SizeProduct DetailShipping List433MHz Shipping LIst868MHz Shipping LIst 915MHz Shipping LIst
LILYGO® TTGO T-Beam V1.1 ESP32 LORA 433/868/915/923MHZ WiFi Wireless Bluetooth Module GPS NEO-M8N IPEX 18650 Battery Holder Product FeaturesESP32Lastest ESP32 Version: REV1WIFIBluetooth 4MB Flash8MB PSRAM3D AntennaLORAProduct DescriptionWorking voltage: 1.8~3.7vAcceptable current：10~14mATransmit current: 120mA@+20dBm 90mA@+17dBm 29mA@+13dBmOperating frequency: 433/470MHz(433HMz version) /868M/915M(868MHz version)Transmit power: +20dBmReceive sensitivity :-139dBm@LoRa &62.5Khz&SF=12&146bps-1...
TTGO T-Beam ESP32 433/868/915/923Mhz WiFi Wireless Bluetooth Module ESP 32 GPS NEO-6M SMA LORA 32 18650 Battery Holder With OLED Product Demonstration（Note:OLED is not soldered to T-BEAM）Product FeaturesESP32Lastest ESP32 Version: REV1WIFIBluetooth 8MB PSRAM4MB Flash3D AntennaLORA Product DescriptionWorking voltage: 1.8~3.7vAcceptable current：10~14mATransmit current: 120mA@+20dBm 90mA@+17dBm 29mA@+13dBmOperating frequency: 433/470MHz(433HMz version) /868M/915M(868MHz version)Transmit power: +20dBmReceive sensitivity :-139dBm@LoRa &62.5Khz&SF=12&14...
SX1278 LoRa ESP32 Bluetooth Wi-Fi Lora Internet Antena Development Board Description:The main chip using ESP32, Tensilica LX6 dual-core processor, clocked at 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b / g / N HT40 Wi-Fi transceiver, baseband, protocol stack and LWIP, integrated dual-mode Bluetooth (traditional Bluetooth and BLE low power Bluetooth).This product is based on the WIFI 32 added SX1278 chip, that is, LoRa ™ remote modem, 433MHz frequency, about -148dBm high sensitivity, +20 dBm power output, high reliability.Onboard 32MByte Flash, Wi-Fi antenna, lithium battery charging circuit and interface, CP2102 USB to serial chip, the perfect support for Arduino development environment, can be very simple and fast for program verificat...