Shenzhen Xin Yuan Electronic Technology Co., Ltd.
 
手机官网
 
关注我们微信公众号
购物车图片 购物车 ( )
找服务 找新闻
全部商品分类
服务热线: 0755-83380665
    ESP32 WIFI Bluetooth Breadboard kit
    发布时间: 2017 - 09 - 06
    describeESP32 Wi-Fi, the Bluetooth built-in ESP - WROOM - 32 microcomputer module, is used on the test circuit board. The central part of the test circuit board plug is compact, 300 mil wide, and the other parts are blocked. In addition, the reset and program write mode switching circuitry is also loaded, so there is no need to make it on another model.Use instance pictures
     LSM303C GY-LSM303C Acceleration Module
    发布时间: 2017 - 09 - 06
    describe1.New Original chip: LSM303C2.3 magnetic field channels and 3 acceleration channels3.LSM303C internal magnetic field = LIS3MDLUsing 4.Power Supply: 3-5v5.±16 gauss magnetic full scale6.±2/±4/±8 g selectable acceleration full scale7.16-bit data output8.SPI / I2C serial interfaces9.Analog supply voltage 1.9 V to 3.6 V10.Power-down mode / low-power mode11.Programmable interrupt generators for freefall, motion detection and magnetic field detection12.Embedded temperature sensor13.Embedded FIFO
    Badusb for arduino Leonardo USB
    发布时间: 2017 - 09 - 06
    Microcontroller: ATmega32u4Clock Speed: 16 MHzOperating Voltage: 5V DCDigital I/O Pins: 10PWM Channels: 4Analog Input Channels: 5UART: 1I2C: 1Micro USB: 1Flash Memory: 32 KB of which 4KB used by bootloaderSRAM: 2.5 KBEEPROM: 1 KBPackage Included:1 x  BadUsb Beetle USB ATMEGA32U4 Development Board Module For Arduino Leonardo R3
close
Popular ranking Recommend
  • D1 mini LiteA simple wifi board with 1MB flash based on ESP-8285.Features11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire supported(except D0)1 analog input(3.2V max input)a Micro USB connection1MB FlashCompatible with ArduinoTutorialsGet started in ArduinoDocumentationSchematic V1.0.0DriverTechnical specsMicrocontrollerESP-8266EXOperating Voltage3.3VDigital I/O Pins11Analog Input Pins1(Max input: 3.2V)Clock Speed80MHz/160MHzFlash1M bytesLength34.2mmWidth25.6mmWeight10gPinPinFunctionESP-8266 PinTXTXDTXDRXRXDRXDA0Analog input, max 3.3V inputA0D0IOGPIO16D1IO, SCLGPIO5D2IO, SDAGPIO4D3IO, 10k Pull-upGPIO0D4IO, 10k Pull-up, BUILTIN_LEDGPIO2D5IO, SCKGPIO14D6IO, MISOGPIO12D7IO, MOSIGPIO13D8IO, 10k Pull-down, SSGPIO15GGroundGND5V5V-3V33.3V3.3VRSTResetRST
    2017 - 08 - 24
    D1 mini ProA mini wifi board with 16MB flash, external antenna connector and built-in ceramic antenna based on ESP-8266EX.Features11 digital input/output pinsInterrupt/pwm/I2C/one-wire1 analog input(3.2V max input)16M bytes(128M bit) FlashExternal antenna connectorBuilt-in ceramic antennaNew CP2104 USB-TO-UART ICSame size as D1 mini, but more lightTutorialsGet started in ArduinoGet started in NodeMCUDocumentationSchematic V1.0.0DriverTechnical specsMicrocontrollerESP-8266EXOperating Voltage3.3VDigital I/O Pins11Analog Input Pins1(Max input: 3.2V)Clock Speed80MHz/160MHzFlash16M bytesLength34.2mmWidth25.6mmWeight2.5gPinPinFunctionESP-8266 PinTXTXDTXDRXRXDRXDA0Analog input, max 3.3V inputA0D0IOGPIO16D1IO, SCLGPIO5D2IO, SDAGPIO4D3IO, 10k Pull-upGPIO0D4IO, 10k Pull-up, BUILTIN_LEDGPIO2D5IO...
    2017 - 08 - 24
    Hello,I bought the wemos D1 mini and I have one problem right after the start. The connection to the web server from my browser doesn't work.I am trying to use example HelloServer for ESP2866Web server, so there should not be any problem with the code. (Also I tried another examples from internet, without better results)After upload to the wemos, serial monitor shows me :Connected to UPC710571 (thats my wifi router)IP address: 192.168.1.12MDNS responder startedHTTP server startedIP address can be pinged from the cmd, everything looks good.BUT when I insert the IP address to my browser, it shows me after few seconds thiswebpage is not availableConnection to 192.168.1.12 has timed out.ERR_CONNECTION_TIMED_OUTHave anybody any advice? I am hopeless.
    2017 - 08 - 24
    Christmas 2015 yours truly was one of the lucky few in the world to receive the ESP32 for experimenting. The board was not assembled, and it was quite intimidating to assemble the board with just a fine tip solder. The experiment is documented at this URL:https://www.instructables.com/id/Beginners-ESP32-Gu...This afternoon, yours truly came across the Arduino Core for ESP32 on github URL here: https://github.com/espressif/arduino-esp32 . Very excited on this discovery, he was eager to experiment with it, but only when he is done with the consultations. If his STM serves him well, he recalled witnessing the exponential growth of IoT devices made with ESP8266 posted on the Internet, the ESP8266 board wars by the various board makers, professionals and amateurs a...
    2017 - 08 - 02
    If you're a night vision fan (or even just a person that doesn't always have time to take pictures during the day), we have a surprise for you. Forget about wasting time and energy mounting a heavy external light or making a DIY LED for your mini-cam. - the D1 board offers built-in LEDs to help you shoot in any lighting conditions.
    2017 - 08 - 24
    NOTE: The esp8266 Arduino core has a bug that causes wifi dhcp connect to fail if a delay() is used in the setup() functionNOTE: Make sure the Serial Monitor DTR and RTS checkboxes are OFF when using esp8266 devices, otherwise you will find youself pressing the reset button quite often :)The ESP8266 hardware can be installed from within Visual Studio Board Manager but the Arduino Ide Board Manager is recommended (bug: click the Rescan button twice after installing new hardware for the boards to appear).NOTE: December 2016 - WiFi (with OTA) Debug Beta has been released. Update of variables during debug is not yet supported. Uses UDP messaging. Breakpoints and debugging auto-deactivates when a debug session ends. To upload with USB and debug ...
    2017 - 08 - 02
    If you have wondered, if is it possible run your sketch on the ESP8266 program like you did on your arduino UNO board. Yes it is possible, without using your UNO board.Just download the setup and start developing from the familiar Arduino IDE.Upload your programs direct to ESP8266  your ESP8266 by pressing the button ‘upload’ in Arduino.  Use the standard sketches like “blink” or use the basic examples like wifi_blink.Arduino programs running on your ESP8266 a 3 US$ wifi enabled board.Don’t forget to  check the example page.
    2017 - 08 - 02
    ESP8266 as ArduinoSo this Lazy Old Geek (L.O.G.) heard about this ESP8266 IC. Basically, it’s a microcontroller that does WiFi. There are many Instructables with this chip and many with an Arduino. But most of these are using the ESP8266 as a sensor/WiFi connected to a standard Arduino.Well, what I wanted to do was use the ESP8266 as an Arduino without having to use a standard Arduino.The ESP8266 is a microcontroller similar to the AtMega328 used in the standard Arduino, e.g., Arduino UNO.Now there is already a lot of information on doing this but I found it confusing, hard to figure out, sometimes misleading so I hope to simplify and clarify the process.Special thanks to Lady Ada, Adafruit and the Adafruit HUZZAH ESP8266 breakout module. As usual she provides thorough, useful information....
    2017 - 08 - 02
    Despite a wealth of tutorials for setting up and writing code for the ESP8266 WiFi module, there has not been much of anything on programming this cheap wireless module with the Arduino IDE. Finally, this has changed. After many months of coding, the Arduino IDE supports the ESP8266 module.The Arduino IDE support was announced on the ESP8266 community forum. Setup is fairly simple with downloads for Linux, OS X, and Windows. This isn’t an ESP8266 shield, either: you can write code for the ESP module, connect the serial pins, and hit the program button.The basic functions of the Arduino IDE – pinMode, digitalRead, digitalWrite, and analogRead – are available. Most of the WiFi functions work just like the WiFi shield library.There are a few things that aren’t written yet; PWM doesn’t work, a...
    2017 - 08 - 02
    This weekend at the Bay Area Maker Faire, Arduino in conjunction with SiFive, a fabless provider of the Open Source RISC-V micros, introduced the Arduino Cinque. This is a board running one of the fastest microcontrollers available, and as an added bonus, this board includes Espressif’s ESP32, another wonderchip that features WiFi and Bluetooth alongside a very, very powerful SoC.Details on the Arduino Cinque are slim at the moment, but from what we’ve seen so far, the Cinque is an impressively powerful board featuring the RISC-V FE310 SoC from SiFive, an ESP32, and an STM32F103. The STM32 appears to be dedicated to providing the board with USB to UART translation, something the first RISC-V compatible Arduino solved with an FTDI chip. Using an FTDI chip is, of course, a que...
    2017 - 08 - 02
  • Christmas 2015 yours truly was one of the lucky few in the world to receive the ESP32 for experimenting. The b...
    2017 - 08 - 02
    NOTE: The esp8266 Arduino core has a bug that causes wifi dhcp connect to fail if a delay() is used in the set...
    2017 - 08 - 02
    If you have wondered, if is it possible run your sketch on the ESP8266 program like you did on your ...
    2017 - 08 - 02
    ESP8266 as ArduinoSo this Lazy Old Geek (L.O.G.) heard about this ESP8266 IC. Basically, it’s a microcontroller that doe...
    2017 - 08 - 02
    Despite a wealth of tutorials for setting up and writing code for the ESP8266 WiFi module, there has not been much of an...
    2017 - 08 - 02
    This weekend at the Bay Area Maker Faire, Arduino in conjunction with SiFive, a fabless provider of the Open Source...
    2017 - 08 - 02
    This tutorial uses built-in touch sensors on the ESP32 Dev Module to control an LED.Step 1: Getting the Dependencies.The...
    2017 - 08 - 02
    The ESP32 is the successor of the famous ESP8266. It has much more features like Bluetooth. This instructable shows you,...
    2017 - 08 - 02
D1 mini LiteA simple wifi board with 1MB flash based on ESP-8285.Features11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire supported(except D0)1 analog input(3.2V max input)a Micro USB connection1MB FlashCompatible with ArduinoTutorialsGet started in ArduinoDocumentationSchematic V1.0.0DriverTechnical specsMicrocontrollerESP-8266EXOperating Voltage3.3VDigital I/O Pins11Analog Input Pins1(Max input: 3.2V)Clock Speed80MHz/160MHzFlash1M bytesLength34.2mmWidth25.6mmWeight10gPinPinFunctionESP-8266 PinTXTXDTXDRXRXDRXDA0Analog input, max 3.3V inputA0D0IOGPIO16D1IO, SCLGPIO5D2IO, ...
2017 - 08 - 24
65
D1 mini ProA mini wifi board with 16MB flash, external antenna connector and built-in ceramic antenna based on ESP-8266EX.Features11 digital input/output pinsInterrupt/pwm/I2C/one-wire1 analog input(3.2V max input)16M bytes(128M bit) FlashExternal antenna connectorBuilt-in ceramic antennaNew CP2104 USB-TO-UART ICSame size as D1 mini, but more lightTutorialsGet started in ArduinoGet started in NodeMCUDocumentationSchematic V1.0.0DriverTechnical specsMicrocontrollerESP-8266EXOperating Voltage3.3VDigital I/O Pins11Analog Input Pins1(Max input: 3.2V)Clock Speed80MHz/160MHzFlash16M bytesLength...
2017 - 08 - 24
57
Hello,I bought the wemos D1 mini and I have one problem right after the start. The connection to the web server from my browser doesn't work.I am trying to use example HelloServer for ESP2866Web server, so there should not be any problem with the code. (Also I tried another examples from internet, without better results)After upload to the wemos, serial monitor shows me :Connected to UPC710571 (thats my wifi router)IP address: 192.168.1.12MDNS responder startedHTTP server startedIP address can be pinged from the cmd, everything looks good.BUT when I insert the IP address to my browser, it show...
2017 - 08 - 24
127
Christmas 2015 yours truly was one of the lucky few in the world to receive the ESP32 for experimenting. The board was not assembled, and it was quite intimidating to assemble the board with just a fine tip solder. The experiment is documented at this URL:https://www.instructables.com/id/Beginners-ESP32-Gu...This afternoon, yours truly came across the Arduino Core for ESP32 on github URL here: https://github.com/espressif/arduino-esp32 . Very excited on this discovery, he was eager to experiment with it, but only when he is done with the consultations. If his STM ...
2017 - 08 - 02
247
网络
If you're a night vision fan (or even just a person that doesn't always have time to take pictures during the day), we have a surprise for you. Forget about wasting time and energy mounting a heavy external light or making a DIY LED for your mini-cam. - the D1 board offers built-in LEDs to help you shoot in any lighting conditions.
2017 - 08 - 24
33
NOTE: The esp8266 Arduino core has a bug that causes wifi dhcp connect to fail if a delay() is used in the setup() functionNOTE: Make sure the Serial Monitor DTR and RTS checkboxes are OFF when using esp8266 devices, otherwise you will find youself pressing the reset button quite often :)The ESP8266 hardware can be installed from within Visual Studio Board Manager but the Arduino Ide Board Manager is recommended (bug: click the Rescan button twice after installing new hardware for the boards to appear).NOTE: December 2016 - WiFi (with OTA) Debug Bet...
2017 - 08 - 02
79
网络
If you have wondered, if is it possible run your sketch on the ESP8266 program like you did on your arduino UNO board. Yes it is possible, without using your UNO board.Just download the setup and start developing from the familiar Arduino IDE.Upload your programs direct to ESP8266  your ESP8266 by pressing the button ‘upload’ in Arduino.  Use the standard sketches like “blink” or use the basic examples like wifi_blink.Arduino programs running on your ESP8266 a 3 US$ wifi enabled board.Don’t forget to  check the example page.
2017 - 08 - 02
54
网络
ESP8266 as ArduinoSo this Lazy Old Geek (L.O.G.) heard about this ESP8266 IC. Basically, it’s a microcontroller that does WiFi. There are many Instructables with this chip and many with an Arduino. But most of these are using the ESP8266 as a sensor/WiFi connected to a standard Arduino.Well, what I wanted to do was use the ESP8266 as an Arduino without having to use a standard Arduino.The ESP8266 is a microcontroller similar to the AtMega328 used in the standard Arduino, e.g., Arduino UNO.Now there is already a lot of information on doing this but I found it confusing, hard to figure out, some...
2017 - 08 - 02
70
网络
Despite a wealth of tutorials for setting up and writing code for the ESP8266 WiFi module, there has not been much of anything on programming this cheap wireless module with the Arduino IDE. Finally, this has changed. After many months of coding, the Arduino IDE supports the ESP8266 module.The Arduino IDE support was announced on the ESP8266 community forum. Setup is fairly simple with downloads for Linux, OS X, and Windows. This isn’t an ESP8266 shield, either: you can write code for the ESP module, connect the serial pins, and hit the program button.The basic functions of the Arduino IDE – p...
2017 - 08 - 02
62
网络
12页次1/2HomePrev12Nextlast
  • 资质认证

    服务商100%实名审核认证

  • 支付安全

    明码标价支付及信息安全

  • 专人服务

    服务全程进行信息化监控

  • 售后无忧

    服务出问题客服经理全程跟进

The unified hotline:
0755-83380665
skype:seatechnolgy
@outlook.com


邮编:330520
  • Ali Express

  • ebay

  • "Sweeping" attention to us, more activities, surprise waiting for you
    E-mail: lily@lilygo.cc       Wechat: 13928411439       QQ :3004603945       Facebook: lily go
    Copyright ©2005 - 2013 Shenzhen Xin Yuan Electronic Technology Co., Ltd.
    犀牛云提供企业云服务